휴대형 자동수분측정기 KHK-21
정전용량 방식의 센서를 사용하여 수증기의 부분입을 측정하는 수분량 측정기로, 측정 시 별도의 전원이 필요없는 휴대형 기기입니다.
- Accuracy
Min 0.2% Max 0.9% of Full Range
- Operating Temperature Range
-20℃ ~ 50℃
- Stack Temperature Range
~ 300℃
- Pressure Range
300 hPa ~ 1300 hPa / 225 mmHg ~ 975 mmHg
- Response Time
T63 - 15sec (upper limit) / T95 – 30sec (upper limit)
제품 소개
KHK-21 제품 특징
제품 소개
• Lithium Iron Phosphate (LiFePO4) battery
The lithium iron phosphate (LiFePO4) battery ensures reliable operation in both low and high-temperature environments, while minimizing the risk of device failure due to thermal runaway during charging, discharging, or external impacts
• Expandable probe
With the expandable probe attached, the device can measure up to approximately 500℃ in stacks
• Probe disconnection detection
If the probe is disconnected during or before use, the safety feature either halts the measurement process or completely prevents it from starting
• Filter and probe installation detection
If the filter is not attached to the end of the probe or if the correct probe is not installed, the device prevents the measurement from taking place. If an extended probe is installed, the device detects it and increases the flow path saturation time accordingly
KHK-21 제품 특징
• Detachable probe
Unlike other models, the device uses a detachable probe, making it easier to transport and store
• Intelligent self-diagnosis
To diagnose any issues with the device, you can perform a self-diagnosis with just a few button touches, quickly identifying abnormalities in the sensors and various connection points. Additionally, you can check for any air leakage in the flow path
• Bluetooth thermal transfer printer
The device supports connection to a Bluetooth thermal transfer printer
• Data storage and display functions
To save data, you don't need to print results after every measurement. You can use the thermal transfer printer to output data or store it on a USB drive
• Data Security
Using the encrypted QR code printed alongside the data from the thermal transfer printer or stored on the USB, the original data can be reliably checked using the KYMA app